The DP6 is a high performance 6.5-inch pendant loudspeaker designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, high sensitivity and realistic sound reproduction, D SERIES pendant loudspeakers can be used in a wide variety of speech and music applications. They are equipped with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP6 can be combined with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.


  • Dimensions (H x Dia): 14.7" x 11.2" (374 x 285 mm)

  • Nominal Beamwidth (H x V): 125° Conical

  • Finish: Black or white paintable ABS matte plastic, dual-layer powder-coated steel grille

  • 70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only)

  • Continuous Max Output: 114 dB (120 dB Peak)

  • Transducers: LF -1 x 6.5”, HF - 1 x 1” exit compression driver

  • Power Handling: 100W continuous @ 8 ohms

  • Operating Range: 65 Hz – 22 kHz

  • Sensitivity (1W/1m): 94 dB

DP6 Pendant Loudspeakers